2010 Mercury MerCruiser InBoard MX 6.2 MPI

Specifications

• Engine Type : V8
• Bore & Stroke (in/mm) : 4.00 x 3.75" (101 x 95 mm)
• Compression Ratio : 9.0:1
• Cooling System : Thermostatically Controlled, Raw Water, Brass Sea Water Pump
• Ignition System : Crank-Fired High Voltage Switch w/ Knock Control & Platinum Plugs
• Charging System : 65 Amp/917 Watt Alternator
• Accessory Drive System : Serpentine Belt
• Engine Guardian System : Low Oil Pressure, High Coolant Temperature, Transmission Temperature, Low Sea Water Pressure, Low Voltage, Over-Rev Control, Knock Control
• Engine Control System : ECM 555 w/ SmartCraft CAN Capability (PCM 555 w/ DTS)
• Fuel Requirements : 87 Octane (R+M)/2
• Fuel Delivery System : Gen III Cool Fuel
• Fuel Injection System : Multi-Point Electronic Fuel Injection (Sequential Fuel Injection w/DTS)
• Water Drain System : 3-Point Manual
• Velvet Drive 5000A : 1.25, 1.5, 2.0, 2.5, 2.8:1
• Velvet Drive 5000V : 1.5, 2.0, 2.5:1
• Velvet Drive 72C : 1.0:1
• ZF 63A (Available w/DTS) : 1.5, 2.0, 2.5, 2.7:1
• ZF 63 IV (Available w/DTS) : 1.5, 2.0, 2.5:1
• Dimensions (LxWxH) in : 43 x 30 x 22
• Dimensions (LxWxH) mm : 1092 x 740 x 559
• Weight w/Velvet Drive (lbs./kg) : 860/390
• Full Closed Cooling System : Optional
• Digital Throttle and Shift : Optional
• Exhaust System : Iron Manifold w/ Ceramic Coated Dry-Joint Exhaust Elbow
• Recommended Engine Oil : SAE 25W-40 NMMA Certified FC-W
• Power : 320 HP (239 kW)
• Displacement : 377 CID (6.2L)
• Induction System : 2-Piece Long Runner Intake w/ 75mm Throttle Body (80mm w/ DTS)
• Full Throttle Range : 4600 - 5000 RPM