2010 Mercury MerCruiser Multisport Injection (MPI) 350 MAG - 300 HP

Specifications

• Engine Type : V8
• Bore & Stroke (in/mm) : 4.00" X 3.48" (101mm X 88mm)
• Compression Ratio : 9.4:1
• Cooling System : Thermostatically Controlled, Raw Water
• Ignition System : Crank-fired High Voltage Switch w/Knock Control and Platinum Plugs
• Charging System : 65 Amp/917 Watt Alternator
• Accessory Drive System : Serpentine Belt
• Engine Guardian System : Low Oil Pressure, High Coolant Temperature, Low Drive Lube, Low Sea Water Pressure, Low Voltage, Over-rev control, Knock Control
• Alpha Ratios : 1.47
• Bravo One Ratios : 1.36, 1.50, 1.65
• Bravo Two Ratios : 2.00, 2.20
• Bravo Three Ratios : 2.00. 2.20, 2.43(H)
• Engine Control System : ECM 555 with SmartCraft CAN Capability (PCM 555 w/DTS)
• Fuel Requirements : 87 Octane (R+M)/2
• Fuel Delivery System : Gen II Cool Fuel-Alpha, Gen III Cool Fuel-Bravo
• Fuel Injection System : Multi-Point Electronic Fuel Injection (Sequential Fuel Injection w/DTS)
• Water Drain System : 3-point Manual Drain (Bravo Models), Single Point Air-Actuated (Optional on Bravo Models), Single Point Manual Drain (Alpha Models)
• Dimensions (LxWxH) in : 32 x 30 x 22
• Dimensions (LxWxH) mm : 814 x 740 x 559
• Digital Throttle and Shift : Optional
• Weight w/Alpha (lbs./kg) : 946/430
• Optional Freshwater Cooling : Kit
• Weight w/Bravo One (lbs./kg) : 987/449
• Weight w/Bravo Two (lbs./kg) : 1004/456
• Weight w/Bravo Three (lbs./kg) : 1013/460
• Exhaust System : Iron Manifold with Ceramic Coated Dry-joint Exhaust Elbow
• Recommended Engine Oil : MerCruiser Full Synthetic Engine Oil - SAE 20W-40
• Power : 300HP (221 kW)
• Displacement : 350 CID (5.7L)
• Induction System : 2-pieceLong Runner intake with 75mm Throttle Body (80mm w/DTS)
• Full Throttle Range : 4800 - 5200 RPM
• CA 4-Star Emissions Control Model : Available