2010 Volvo Diesel Inboard D9-500
Print Detail Page |
Request a Quote |
I'm Interested
|
|
The D9 in-line 6 diesel is developed from the latest design in modern diesel technology.
The engine has a robust block with ladder frame, high pressure unit injector system, 4 valves per cylinder, "twin entry" turbo and aftercooler. Together with a large swept volume and the electronic engine management system, this results in a very smooth running engine with world-class diesel performance, combined with low fuel consumption and emissions.
Have a question about the 2010 Volvo Diesel Inboard D9-500?
|
Specifications
Engine Specifications
-
Cylinder Configuration
:
In-line 6
-
Max Engine Speed (RPM)
:
2600
-
Displacement (cu. in.)
:
574
-
Power (hp)
:
500
-
Bore (in.)
:
4.72
-
Compression Ratio
:
17.4:1
-
Dry Weight bobtail (kg/lb.)
:
1075 (2370)
-
Max Torque, Nm (lbf.ft) @ 1400 rpm
:
1630 (1202)
-
Dry Weight w/Reverse Gear ZF280A-EB (kg/lb.)
:
1170 (2579)
-
Stroke (in.)
:
5.43
-
Crankshaft Power (kW/hp) 2600 rpm
:
368 (500)
-
Recommended Fuel to Conform to
:
ASTM-D975 1-D & 2-D, EN 590 OR JIS KK 2204
-
Specific Fuel Consumption g/kWh (lb/hph) 2600 rpm
:
214 (0.347)
-
Engine
:
D9A2H D9-500 (R5)
-
Production Period
:
2009-
-
Operation
:
4-stroke, direct-injected, turbocharged diesel engine with aftercooler
Specifications are subject to change without notice
-
Coolant system prepared for hot water outlet
-
Easily accessible seawater impeller pump in rear end
-
Seawater-cooled tubular heat exchanger
-
12V/115A or 24V/80A alternator
-
Cylinder block and cylinder head made of cast-iron
-
Drop forged crankshaft with induction hardened bearing surfaces and fillets with seven main bearings
-
Each cylinder features cross-flow inlet and exhaust ducts
-
Four valve per cylinder layout with overhead camshaft
-
Gallery oil-cooled cast aluminum alloy pistons with three piston rings
-
Ladder frame fitted to engine block
-
One-piece cast-iron cylinder head
-
Rear-end transmission
-
Replaceable wet cylinder liners and valve seats/guides
-
Air filter with replaceable inserts
-
Mid-positioned twin entry turbocharger with aftercooler
-
6-hole high pressure injector nozzles
-
Electronic Unit Injectors, one per cylinder, vertically positioned at the center in between the four valves
-
Electronically controlled injection timing
-
Gear-driven fuel pump, driven by timing gear
-
Single fine fuel filter of spin-on type, with water separator and water alarm
-
Integrated oil cooler in cylinder block
-
Symmetrically positioned twin full flow oil filter of spin-on type and by-pass filter
-
ZF280A-EB/-IVE, MG5075A-E, electronically shifted.
-
Complete instrumentation including key switch and interlocked alarm
-
Electronic remote control for throttle and shift
-
EVC monitoring panels for single or twin installations
-
Plug-in connections
|
Print Detail Page |
Request a Quote |
I'm Interested