2010 Volvo Gasoline Sterndrive 5.7GiCE-300
Print Detail Page |
Request a Quote |
I'm Interested
|
|
A genuine gasoline V-8 for performance motorboats. With 5.7 liter displacement and eight cylinders, this engine delivers loads of torque and power across the entire speed range. The advanced fuel-injection system is a perfect match for the SX single-propeller drive or the Duoprop twin-propeller drive. Power steering is fitted as standard for maximum driving comfort.
Have a question about the 2010 Volvo Gasoline Sterndrive 5.7GiCE-300?
|
Specifications
Engine Specifications
-
Propeller Shaft Power, kW (hp)
:
224 (300)
-
Cylinder Configuration
:
V-8
-
Max Engine Speed (RPM)
:
5000
-
Displacement (cu. in.)
:
348
-
Power (hp)
:
300
-
Bore (in.)
:
4
-
Compression Ratio
:
9.4:1
-
Stroke (in.)
:
3.48
-
Engine
:
5.7GiCE-300-M
-
Production Period
:
2009-
-
Operation
:
4-stroke
Specifications are subject to change without notice
-
Crankmounted seawater pump
-
Electrocoated exhaust risers and manifolds (non-catalyst engines)
-
Flush fitting - hose connection to flush cooling system with freshwater
-
Serpentine belt with spring tensioner
-
Thermostatically controlled seawater cooling. The engine can be ordered with factory-mounted freshwater cooling.
-
12V corrosion-protected electrical system
-
14-pin engine to boat connection
-
75A alternator with internal transistorized voltage regulator and internal fan
-
Audio alarm kit - engine oil pressure and temperature as well as exhaust overheat. The engine also has a low voltage audio alarm. Can be mounted at helm.
-
Breakerless electronic ignition system
-
Charging regulator with battery sensor for voltage drop compensation
-
ECM unit ensures constant optimum performance with diagnostic capability
-
One 20A fuse for protection of the fuel feed pumps and one 15A fuse for protection of the fuel injection system
-
One 40A resettable circuit breaker for the trim system
-
Platinum tipped spark plugs
-
Starter motor power 1.0 kW
-
Color-coded service points
-
Cylinder block and cylinder heads made of cast-iron for good corrosion resistance
-
Five-bearing crankshaft
-
Pistons with two compression rings and one oil scraper ring
-
Valve train consisting of single camshaft, hydraulic valve lifters, push rods and two overhead valves per cylinder
-
Two adjustable rubber mounts, one on each side of the engine, and two between transom shield assembly and engine
-
EVC-EC -- Plug and go: EVC Electronic Vessel Control is the latest development in engine control and instrumentation for Volvo Penta marine engines. EVC makes boating easier and safer, offering electronic shift and throttle, twin engine and power trim synchronization and new software functions such as trip computer and power trim assistant. EVC is easily scalable from one station up to four, from a classic dashboard up to an advanced driver information system. The system is built on the latest automotive technology with waterproof connectors, so it's just plug and go.
-
Closed crankcase ventilation
-
Complete exhaust line with pipe and bellows for exhaust outlet through the drive
-
Flame arrestor
-
Marine intake manifold developed for Multi Port Fuel Injection
-
Seawater-cooled exhaust manifolds and risers made of cast iron (non-catalyst engines)
-
Flexible fuel lines
-
Fuel filter with water separator
-
Multi Port Fuel Injection system - MPI
-
Two electric fuel feed pumps
-
Pressure lubrication system with full-flow oil filter of spin-on type and environmentally friendly replaceable paper insert
-
Remote oil filter
-
Electrically operated hydraulic system with trim gauge for best driving comfort
-
High capacity trim pump integrated with transom shield to ease installation and save space in engine compartment
-
Catalyst: The 5.0GiCE-300 with catalysts has been developed with the latest in gasoline exhaust after-treatment technology. High efficiency three-way catalytic converters based on robust stainless steel metallic substrates drastically reduce the emissions of hydrocarbons, nitrogen oxides and carbon monoxide.
-
Joystick
|
Print Detail Page |
Request a Quote |
I'm Interested